• Free shipping on orders over $150


    Your Cart is Empty

    Wellmaster Water Softener


    Plumbing Connectors


    The Wellmaster water softener is Aquatell's answer to challenging well water conditions that demand a heavy-duty response. This softener will perform in extreme hardness conditions and where iron and manganese levels are very high. HV (High Velocity) softening resin is at the heart of this over-achiever. This system will handle water with hardness values up to 85 grains per gallon and 20mg/L of combined iron + manganese* and unlike conventional resins, it will not become fouled in the process.

    High-Velocity (HV) resin and custom programming allow this system to tackle the most difficult rural water applications while maintaining resin performance and longevity. The USA-made Clack™ downflow-regenerating control valve excels in challenging environments and will perform trouble-free for many years.

    The Wellmaster is built with a modified riser tube called a turbulator. This device creates agitation of the softening bed during backwash to ensure that accumulated hardness, iron, and manganese are thoroughly scrubbed from the resin and significantly enhances the effectiveness and longevity of the system in challenging conditions.


    Tech Specs

    • Designed & Built in London, Ontario, Canada
    • Factory Programmed
    • Demand Regenerated
    • True 1" Throughput for Max Flow
    • Max Softener Efficiency Rating (SER): 5,000 Grains / Pound (3 pounds of salt for 15,000 grains)
    • Challenging Conditions Efficiency (SER): 2,525 Grains / Pound (9.5 pounds of salt for 24,000)
    • Soft Water Brine Tank Refill
    • Service Flow Rate of 10 gpm for hardness less than 35 gpg
    • Service Flow Rate of 7.5 gpm for hardness less than 65 gpg
    • Service Flow Rate of 5.0 gpm for hardness less than 85 gpg
    • 10 mg/L (PPM) of Iron + Manganese*
    • Brine Tank Dimensions: 14" x 14" x 35"
    • 200 Pound Salt Capacity (about 3 standard bags of salt)
    • 12-hour Clock Battery Backup
    • Softener Retains Settings Even If Unpowered For Months
    • 110V A/C Adapter
    • All Components are NSF Standard 61 Certified
    • Shipping Box 1: 9.25" x 9.25" x 35.5" - 61 lbs
    • Shipping Box 2: 11.5" x 11.5" x 35.5" - 21 lbs

    In the Build

    • Clack™ WS1 Downflow Control Valve
    • Bypass Valve + Choice of Plumbing Connectors
    • High-Durability Turbine Meter
    • 1.0 Cubic Foot of 10% USA-Made High-Velocity Resin
    • Top Basket (Prevents Accidental Resin Loss)
    • 9" x 48" Media Tank
    • 1.05" High Flow Riser Tube
    • 14" x 14" x 35" Brine Tank
    • Brine Well  with Safety Float
    • Brine Tank Floor Drain Fitting
    • 5' Brine Line
    • 2 x 1g Silicone Lubricant


    • 5 years on the control valve, tanks, hardware
    • 10 years on softener resin

    This warranty is for manufacturer's defects only. Certain water softener components, such as the main piston, seal & spacers, and the brine valve will experience wear and tear during normal softener usage and may not be covered. Resin that has experienced unusual application conditions may not be covered. See water softener warranty details here.