Whole House pH Correction System

• Ideal for boosting pH that is 6.0 or higher up to pH of 7
• 100% calcite media bed
• Clack WS1TC control valve

The Whole House pH Correction System uses calcite and Corosex media to neutralize and boost the pH of acidic water conditions. Installed on the water main of the home, this system automatically backwashes to keep the pH correction media fresh and functioning effectively. The calcite and Corosex media is sacrificial and will eventually need to be replaced. Depending on the incoming water pH and the total water-use, media is usually topped up after 3 - 5 years.

• Clack WS1 Control Valve (WS1TC)
• 100% Calcite Media
• 110V standard outlet required
• Required Backwash Flow Rate as follows: 1.0 cubic foot = 6.5 GPM / 1.5 cubic foot = 9.0 GPM / 2.0 cubic foot = 12 GPM
• Ideal for boosting pH from 6.0 or higher up to 7.0

• 1 x pH correction system

• 5 years top to bottom

This warranty is for manufacturer's defects only. Certain control valve components, such a the main piston, seal & spacers, and the brine valve will experience wear and tear during normal usage of the softener and are not covered under the warranty.