SHOP
  • Take The SOFTENER FINDER Quiz

  • Free shipping on orders over $150

    0

    Your Cart is Empty

    Citymaster PRO+ Water Softener

    AQPRO2AQXPLUS-1

    plumbing connectors

    Description

    The Citymaster PRO+ utilizes High-Velocity (HV) softening resin combined with Aquatell's proprietary mix of filtration media (AQX) to deliver a softener + filter combination that delivers beautifully soft, filtered water to your entire home or cottage. This versatile system can be used to soften water where extreme levels of hardness, iron, or manganese exist or in large homes or cottages where high service flow rates are required.

    The Citymaster PRO+ is built with 0.5 cubic feet of AQX media, significantly improving the taste, odour, and overall healthiness of the water for your entire home. AQX dramatically reduces chlorine, chloramine, and thousands of other contaminants for over 400,000 gallons (about 1.5 million Litres) of throughput. This media can be replaced in the future without the need to replace the softening resin. The chlorine/chloramine reduction capability of this media significantly increases resin lifespan and this is reflected in the 2 extra years of resin warranty for this model.

    The combination of the Clack™ upflow-regeneration control valve and HV resin also means that incredible efficiencies can be obtained. The Citymaster PRO+ can regenerate using as little as 21 gallons of water and 3 pounds of salt achieving a Softener Efficiency Rating (SER) of 5,000 grains per pound of salt used.

    This system ships with a heavy-duty sediment filter system to ensure your softener is protected and the water in your home is sediment-free.

    Resources

    Tech Specs

    • Designed & Built in London, Ontario, Canada
    • Factory Programmed Control Valve
    • Demand Regenerated
    • True 1" Throughput for Max Flow
    • Max Softener Efficiency Rating (SER): 5,000 Grains / Pound
    • 15,000 Grains Capacity @ 3 Pounds of Salt
    • 24,000 Grains Capacity @ 9 Pounds of Salt
    • As Little As 21 Gallons of Water Used Per Regeneration
    • 400,000 Gallon Chlorine / Chloramine Reduction Capacity
    • Soft Water Brine Tank Refill
    • Treatment Flow Rate of 10 gpm for hardness less than 35 gpg
    • Treatment Flow Rate of 7.5 gpm for hardness less than 65 gpg
    • Max System Flow Rate of 21 gpm
    • 5 mg/L (PPM) of Iron + Manganese*
    • Brine Tank Dimensions: 14" x 14" x 35"
    • 200 Pound Salt Capacity (about 4.5 standard bags of salt)
    • 12-hour Clock Battery Backup
    • Softener Retains Settings Even If Unpowered For Months
    • 110V A/C Adapter
    • All Components are NSF Standard 61 Certified
    • Shipping Box 1:  10" x 10" x 50" - 67 lbs
    • Shipping Box 2: 15" x 15" x 36" - 30 lbs

    In the Build

    • Clack™ WS1 Upflow Control Valve
    • Bypass Valve + Choice of Plumbing Connectors
    • High-Durability Turbine Meter
    • 1.0 Cubic Foot of 10% USA-Made High Velocity Resin
    • 0.5 Cubic Feet of Aquatell AQX Filtration Media
    • Top Basket (Prevents Accidental Resin Loss)
    • 9" x 48" Media Tank
    • 1.05" High Flow Riser Tube
    • 14" x 14" x 35" Brine Tank
    • Brine Well  with Safety Float
    • Brine Tank Floor Drain Fitting
    • 5' Brine Line
    • 10" Big Blue Filter Housing w 1" Inlet/Outlet
    • 25-to-1 Micron Gradient Sediment Cartridge
    • Filter Mounting Bracket + Hardware
    • 2 x 1g Silicone Lubricant
    • 2 x 1g Silicone Lubricant

      Warranty

      • 5 years on the control valve, tanks, hardware
      • 10 years on softener resin

      This warranty is for manufacturer's defects only. Certain water softener components, such as the main piston, seal & spacers, and the brine valve will experience wear and tear during normal softener usage and may not be covered. Resin that has experienced unusual application conditions may not be covered. See water softener warranty here.